Table of Contents
Advertisement
2
Features and Functions
44
Example 4, To output a Ramp wave
-> *CLS; *RST
-> FUNC RAMP
-> VOLT 5 VPP
-> FREQ 10000
-> VOLT:OFFS 0
-> FUNC:RAMP:SYMM 50 //Changes the symmetry to 50%.
-> OUTP ON
//To reset the U2761A to default
power-on state, this command
can be ignored if this operation
is not required.
//Sets the output to Ramp wave.
//Sets the output amplitude to
5 Vpp.
//Sets the output frequency to
10 kHz.
//Sets the output offset to 0.
//Turns on output.
U2761A User's Guide
Advertisement
Table of Contents
