Output Frequency; Figure 2-2 Top Panel View Of The U2761A; Table 2-2 Output Frequency Range - Agilent Technologies AGILENT U2761A User Manual

Output Frequency

U2761A User's Guide
To select a function, click any of the functions on the top
panel as shown below. When a function is selected, the
button will be illuminated.

Figure 2-2 Top panel view of the U2761A

Click Arb
to output the Arbitrary waveform. Select
other Arbitrary waveform choices from the drop down list
.
Remote Interface Operation
FUNCtion {SINusoid|SQUare|RAMP|PULSe|DC|USER}
You can also use the APPLy command to select the function,
frequency, amplitude, and offset.
As shown below, the output frequency range depends on the
function currently selected. The default frequency is 1 kHz for
all functions.

Table 2-2 Output frequency range

Function
Sine
Square
Ramp, Triangle
Pulse
DC
Arbitrary
Features and Functions
Minimum frequency
1 μHz
1 μHz
1 μHz
500 μHz
Not applicable
1 μHz
2
Maximum frequency
20 MHz
20 MHz
200 kHz
5 MHz
Not applicable
200 kHz
29