Table of Contents
Advertisement
E. Connect the Module to Your PC
N O T E
U2761A User's Guide
Ensure that the Agilent Measurement Manager is installed before
proceeding.
1 After the installations have completed, connect the power
cord to the AC/DC power adapter. The AC/DC power
adapter requirements are 100 to 240 VAC, 50/60 Hz, with
an output voltage of +12 VDC.
2 Insert the DC output plug from the AC/DC power adapter
to the power jack on the rear panel of the U2761A.
3 Connect the U2761A to any USB port on your PC with
the bundled USB cable.
4 Your PC will automatically detect the connected unit and
the Found New Hardware Wizard window will appear. Select
Yes, this time only and click Next to proceed.
Getting Started
1
15
Advertisement
Table of Contents
