Table of Contents
Advertisement
Carrier Waveform
U2761A User's Guide
Soft Front Panel Operation
Click Mod
and then select ASK
Figure 2-
26. To output the ASK waveform, configure the
settings for the carrier frequency, output amplitude, offset
voltage, and ASK rate.
Figure 2-26 Panel view of ASK
Remote Interface Operation
ASKey:STATe {0|OFF|1|ON}
The ASK carrier waveform consists of Sine, Square, Ramp,
Triangle, or Arbitrary waveform. The default waveform is
Sine wave. You cannot use Pulse or DC as the carrier
waveform.
Soft Front Panel Operation
For Arbitrary waveforms, select Arb
as shown in
Figure 2- 2
from the drop down list
Figure 2-
16.
Features and Functions
and select the desired waveform
as shown in
2
as shown in
at the top panel
77
Advertisement
Table of Contents
