Table of Contents
Advertisement
2
Features and Functions
Generate AM Using SCPI Commands
54
Example 1
-> *CLS; *RST
-> AM:STAT ON
-> FUNC SQU
-> FREQ 2000
-> VOLT 5 VPP
-> VOLT:OFFS 0
-> AM:INT:FUNC SIN
-> AM:INT:FREQ 500
-> AM:DEPT 50
-> OUTP ON
//To reset the U2761A to default
power-on state, this command
can be ignored if this operation
is not required.
//Enables AM.
//Sets the carrier waveform to
Square wave.
//Sets the carrier frequency to
2 kHz.
//Sets the output amplitude to
5 Vpp.
//Sets the output offset to 0.
//Changes the modulating
waveform shape to Sine wave.
//Changes the modulating
frequency to 500 Hz.
//Changes the modulation depth
to 50%.
//Turns on output.
U2761A User's Guide
Advertisement
Table of Contents
