Internal Triggering; Manual Triggering - Agilent Technologies AGILENT U2761A User Manual

2 Features and Functions

Internal Triggering

Manual Triggering

86
Remote Interface Operation
TRIGger:SOURce {IMMediate|EXTernal|BUS}
In the Internal trigger mode, the U2761A continuously
performs frequency sweep (as specified by the sweep time).
This is the default trigger source for both soft front panel
and remote interface use.
Soft Front Panel Operation
On the Trigger Setup panel as shown in
Internal from the drop down list
panel.
Remote Interface Operation
TRIGger:SOURce IMMediate
In the Manual (software) triggering mode, you can manually
trigger the U2761A by clicking Trigger
initiates one sweep each time you click the button. The
Trigger
button is illuminated while the U2761A waits
for a Manual trigger.
Soft Front Panel Operation
On the Trigger Setup panel as shown in
Manual from the drop down list
panel.
Figure 2- 28, select
at the Source
. The U2761A
Figure 2- 28, select
at the Source
U2761A User's Guide