Table of Contents
Advertisement
2
Features and Functions
Generate FM Using SCPI Commands
60
Soft Front Panel Operation
On the Deviation panel as shown in
desired frequency deviation value and select the unit from
the drop down list.
Remote Interface Operation
FM:DEViation <peak deviation in Hz>
Example 1
-> *CLS; *RST
-> FM:STAT ON
-> FUNC SIN
-> FREQ 1000
-> VOLT 5 VPP
-> VOLT:OFFS 0
-> FM:INT:FUNC SIN
-> FM:INT:FREQ 500
-> FM:DEV 100
-> OUTP ON
Figure 2-
//To reset the U2761A to default
power-on state, this command
can be ignored if this operation
is not required.
//Enables FM.
//Sets the carrier waveform to
Sine wave.
//Sets the carrier frequency to
1 kHz.
//Sets the output amplitude to
5 Vpp.
//Sets the output offset to 0.
//Changes the modulating
waveform shape to Sine wave.
//Changes the modulating
frequency to 500 Hz.
//Changes the frequency
deviation to 100 Hz.
//Turns on output.
U2761A User's Guide
18, input the
Advertisement
Table of Contents
