Table of Contents
Advertisement
SWEEP CHARACTERISTICS
Waveforms
Type
Direction
Sweep time
Trigger
TRIGGER CHARACTERISTICS
Trigger input
Input level
Slope
Pulse width
Input impedance
Latency
Jitter (RMS)
Trigger output
Input level
Pulse width
Output impedance
Fanout
Rise time
U2761A User's Guide
Sine, Square, Ramp, Arbitrary
Linear or Logarithmic
Up or Down
1 ms to 500 s
Single, External, or Internal
TTL compatible
Rising or Falling, Selectable
>100 ns
>10 kΩ, DC coupled
<500 ns
6 ns (3.5 ns for Pulse)
TTL compatible into ≥1 kΩ
>400 ns
50 Ω, typical
4 TTL
≤20 ns
th
Add 1/10
of output amplitude and offset specification per °C for
1
operation outside the range of 18 °C to 28 °C.
DC offset set to 0 V.
2
Tyical spurious output at low amplitude is –70 dBm.
3
Add 1 ppm/°C (average) for operation outside the range of 18 °C to
4
28 °C.
Characteristics and Specifications
3
101
Advertisement
Table of Contents
