Table of Contents
Advertisement
U2761A User's Guide
Example 2, To output a Sine wave
-> *CLS; *RST
-> FUNC SIN
-> VOLT 5 VPP
-> FREQ 1000
-> VOLT:OFFS 0
-> OUTP ON
Example 3, To output a Square wave
-> *CLS; *RST
-> APPL:SQU 2000,5 VPP,0 //Sets the output to Square
-> FUNC:SQU:DCYC 30
-> OUTP ON
Features and Functions
//To reset the U2761A to default
power-on state, this command can
be ignored if this operation is not
required.
//Sets the output to Sine wave.
//Sets the output amplitude to 5 Vpp.
//Sets the output frequency to 1 kHz.
//Sets the output offset to 0.
//Turns on output.
//To reset the U2761A to
default power-on state,
this command can be
ignored if this operation
is not required.
wave, frequency 2 kHz,
amplitude
5 Vpp, offset 0.
//Changes the duty cycle to
30%.
//Turns on output.
2
43
Advertisement
Table of Contents
