Features and Functions
2
Remote Interface Operation
FUNCtion:RAMP:SYMMetry <percent>
The APPLy command automatically sets the symmetry to
100%.
Output Control
You can disable or enable the soft front panel output
control. By default, the output is disabled at power-on. When
enabled, the Output
button is illuminated.
If an excessive external voltage is applied to the device
output connector, the output will be disabled. To re-enable
the output, remove the overload from the output connector
and click Output
to enable the output.
Soft Front Panel Operation
Click Output
to enable or disable the output as shown
in
Figure 2-
11.
Figure 2-11 Panel view of the output section
U2761A User's Guide
41