Carrier Waveform
U2761A User's Guide
Soft Front Panel Operation
Click Mod
and select FSK
Figure 2-
22. To output the FSK waveform, configure the
settings for the carrier frequency, output amplitude, offset
voltage, "hop frequency", and FSK rate.
Figure 2-22 Panel view of FSK
Remote Interface Operation
FSKey:STATe {0|OFF|1|ON}
The FSK carrier waveform consists of Sine, Square, Ramp,
Triangle, or Arbitrary waveform. The default carrier
waveform is Sine wave. You cannot use Pulse or DC as the
carrier waveform.
Soft Front Panel Operation
For Arbitrary waveforms, click Arb
as shown in
Figure 2- 2
from the drop down list
Figure 2-
16.
Features and Functions
as shown in
at the top panel
and select the desired waveform
as shown in
2
67