Table of Contents
Advertisement
Generate PSK Modulation Using SCPI Commands
U2761A User's Guide
Example 1
-> *CLS; *RST
-> PSK:STAT ON
-> FUNC SIN
-> FREQ 1000
-> VOLT 5 VPP
-> VOLT:OFFS 0
-> PSK:INT:RATE 10
-> PSK:DEV 180
-> OUTP ON
Features and Functions
//To reset the U2761A to
default power-on state, this
command can be ignored if
this operation is not
required.
//Enables PSK modulation.
//Sets the carrier waveform to
Sine wave.
//Sets the carrier frequency to
1 kHz.
//Sets the output amplitude to
5 Vpp.
//Sets the output offset to 0.
//Sets the PSK rate to
10 Hz.
//Sets the PSK deviation to
180°.
//Turns on output.
2
75
Advertisement
Table of Contents
