Table of Contents
Advertisement
2
Features and Functions
92
1 Select the Arbitrary waveform function.
Click Arb
2 Set the waveform period.
Select Period
numeric drop down
waveform.
For example, set the period of the waveform to 10 ms.
3 Set the waveform voltage limits.
Select HiLevel
high and low voltage levels that can be reached while
editing the waveform. The upper limit must be greater
than the lower limit.
For example, set the upper limit to 2.0 V and the lower
limit to 0 V.
4 Start the Arbitrary waveform editor.
Select Non Built-in Waveform from the Arbitrary's drop down
list
waveform editor.
5 Select the interpolation method.
Click
to enable or disable linear interpolation between
the user-defined points. With interpolation enabled
(default), the waveform editor makes a straight-line
connection between the points. With interpolation
disabled, the waveform editor maintains a constant
voltage level between the points and creates a "step-like'
waveform.
to select the Arbitrary function.
and use the numeric keypad or
to set the period for the
and Lolevel
and click
to start the Arbitrary
to set the
U2761A User's Guide
Advertisement
Table of Contents
