Delivery; Final Inspection; Transport To The Customer; Handing Over The Product - Otto Bock Centro S1 Instructions For Use Manual

Table of Contents

Advertisement

Delivery

CAUTION
Lack of instruction
Injuries, malpositions, illness of the user due to incorrect information
► The qualified personnel is responsible for making sure that the user and/or attendant/nursing staff has under­
stood the proper adjustment, use, maintenance and care of the belt system.
► In particular, ensure that the user and/or attendant/care staff knows how to quickly loosen and open the
product to avoid delays in case of emergency.
Depending on the order, the lap belt was included with the overall product.
The following steps are required for installation:
1) Loosen the screw connections of the existing side panels one after the other (see fig. 12, item 1/2).
2) Slightly pull out the respective mounting screw from the inside. Hold the lap belt against the bore respectively
from the outside.
3) Put the mounting screw respectively through the safety belt and firmly tighten the screw connection (see
fig. 16, item 1). Make sure that the side panel can be folded over.
4) Adjust the safety belt. Information on the settings can be found in the manufacturer's instructions for use
accompanying each product.
15
8 Delivery

8.1 Final inspection

A final check must be carried out before the wheelchair can be handed over:
Do the quick-release axles rotate freely and lock securely?
Only after adjustment: Have the brakes (wheel locks) been adjusted correctly?
Only after adjustments: Has the anti-tipper been adjusted correctly?

8.2 Transport to the customer

The wheelchair should be transported to the user in disassembled state using the outer packaging.

8.3 Handing over the product

WARNING
Lack of instruction
Tipping over, falling of the user due to lack of knowledge
► Instruct the user or the attendant in the proper use of the product when handing it over.
The following steps must be performed for the safe delivery of the product:
A sitting test has to be conducted with the user of the product. Pay special attention to proper positioning
according to medical considerations.
The user and any attendants must be instructed in the safe use of the product. In particular, the enclosed
instructions for use are to be used.
The instructions for use must be given to the user/attendant upon delivery of the wheelchair.
18
16
Centro S1

Advertisement

Table of Contents
loading

Table of Contents