Table of Contents
Advertisement
4) The lap belt should be at an angle of about 60° to the seat bottom. The belt strap should run across the thighs
in front of the pelvic bones (see fig. 33).
Possible errors
•
The lap belt is positioned above the user's pelvis in the area of the soft part of the stomach.
•
The user does not sit upright in the seat.
•
If the lap belt is too loose, the user can shift/slide out to the front.
•
During the installation/adjustment, the lap belt is routed over parts of the seating system (e.g. over forearm
supports or seat pads). This causes the lap belt to lose its retaining function.
33
9.13 Transfer version
The transfer version with 12" rear wheel is especially well suited for patient transfer.
34
9.14 Disassembly and transport
CAUTION
Exposed pinch points
Crushing, pinching due to incorrect handling
► When folding the wheelchair out or together, only grip by the specified components.
NOTICE
Deformation when folded
Damage to the product, problems unfolding due to unallowable loads
► Never place heavy objects on the folded product.
Centro S1
60°
Use
27
Advertisement
Table of Contents
