Preparing The Product For Use - Otto Bock 17LS3 10 Instructions For Use Manual

► Observe the alignment, assembly and adjustment instructions.
CAUTION
Mechanical damage to the product
Injuries due to changes in or loss of functionality
► Use caution when working with the product.
► Check the product for proper function and readiness for use.
► In case of changes in or loss of functionality, discontinue use of the
product and have it checked by authorised, qualified personnel.
CAUTION
Excessive strain due to use on more than one patient
Risk of injury and loss of functionality as well as damage to the product
► Use the product on only one patient.
► Observe the maintenance recommendations.
NOTICE
Exposure of the product to unsuitable environmental conditions
Damage, brittleness or destruction due to improper handling
► Avoid storage in condensing ambient humidity.
► Avoid contact with abrasive substances (e.g. sand).
► Do not expose the product to operating temperatures below -10 °C
(14 °F) or above +45 °C (113 °F) (e.g. excessive sunlight, drying on a
radiator).

5 Preparing the product for use

CAUTION
Repeated bending at the same position
Risk of injury due to breakage of the bar, change in or loss of functionality
► Avoid repeated bending at the same position.
CAUTION
Mechanical damage to the product
Risk of injury due to breakage of the bars, change in or loss of functionality
► Do not carry out any heat treatment on steel or titanium bars at temper­
atures above 300 °C.
14