WBM XPC500 Grapple Parts, Service And Installation page 6

XPC500 / XPC600 GRAPPLE
PARTS, SERVICE AND INSTALLATION
GENERAL INFORMATION
GENERAL SAFETY
General
• This manual is to be used as a guide only. A safety program should be developed by the
owners and operators that is specific to each application.
• The owners and operators are responsible for safe working procedures, in every
application and circumstance.
• Ensure all personnel/objects are at the recommended O.E.M (Original Equipment
Manufacturer) safe working distance from the machine.
Maintenance
• Installation and maintenance of the attachment is to be done by a qualified service
technician. Ensure the technician has read and understands the manual before
installation. This manual is not intended as a substitute for adequate training and
experience.
• Do not modify any part of the attachment, unless authorized by Weldco-Beales Mfg.
• The machine and attachment contain several pinch points.
• Correctly support all attachments and linkages before performing maintenance or
inspections.
• If the attachment is not functioning correctly have it checked and/or repaired by a qualified
service technician before using the attachment.
• Any cracking or component damage must be repaired; any damaged components or
missing parts must be replaced prior to any and all operation of the attachment.
• All attachment maintenance schedules must be included in the machine's maintenance
schedules
Hydraulics
• All hydraulic leaks or damage must be repaired, prior to any operation of the attachment.
• Never check for hydraulic leaks with your hand. Pressurized hydraulic leaks may cause
laceration or amputation. Use scrap material (ie. cardboard, paper etc.) to check hydraulic
hoses and fittings. Wear the correct Personal Protective Equipment (PPE).
• Hydraulic components may contain residual pressure. Never work on a system with
hydraulic connections that may be pressurized. Take every precaution to ensure no
pressure remains in the system.
Failure to do so may result in property damage, serious injury or death.
Weldco-Beales Manufacturing
! WARNING
WBM
Page 6