[D] Port Statistics Detail; [M] Monitor; [V] Virtual Lan - Cisco RJ-45-to-AUX Brochure

[C] Configure port—Provides a shortcut to the Port Configuration menu.
[V] View port statistics—Displays individual port statistics.
[N] Next port—Forwards to the next configurable port.
[G] Goto port—Configures any identified port.
[P] Previous port—Configures the previous configurable port.
[X] Exit to Main Menu—Returns you to the main menu.

[D] Port Statistics Detail

The Port Statistics Detail displays the receive and transmit statistics for the port you select. This page can be
used to help you identify performance or connectivity problems.
The options available from the Port Statistics Detail menu are as follows:
[A] Port Addressing—Displays the Port Addressing menu.
[C] Configure Port—Displays the Port Configuration menu.
[R] Reset Port Statistics—Allows you to clear the port statistics. Enter [Y] (yes) to clear the port
statistics.
[N] Next Port—Displays the detailed port statistics for the next sequentially numbered Port on the
switch.
[G] Go To Port—Displays the detailed port statistics for a manually specified port.

[M] Monitor

Choosing M from the Main Menu will show you the following Monitoring Configuration menu:
Catalyst 1900 − Monitoring Configuration
——————————————————Settings——————————————————
[C] Capturing frames to the Monitor
[M] Monitor port assignment
Current capture list: 1−24, AUI
——————————————————Actions——————————————————
[A] Add ports to capture list
[D] Delete ports from capture list
[X] Exit to Main Menu
Enter Selection:
The following list shows the Monitoring Configuration menu options and a description of each:
[C] Capturing frames to the Monitor—Allows you to enable or disable port monitoring on the switch.
[M] Monitor port assignment—Allows you to indicate the port to which captured frames are sent. The
default is None.
[A] Add ports to capture list—Allows the addition of ports you want to monitor. You can enter "all"
to monitor all ports.
[D] Delete ports from capture list—Allows the addition of ports you want to remove from
monitoring. You can enter "all" to remove all ports.
[X] Exit to Main Menu—Returns you to the Main Menu.

[V] Virtual LAN

To implement VLANs (covered in Chapter 5), use the V command from the Main Menu. Because the
Standard Edition software does not support ISL and other high−end VLAN protocols, the VLAN menu is
quite simple:
Disabled
None
293