[N] Network Management - Cisco RJ-45-to-AUX Brochure

Cisco switch brochure
Table of Contents

Advertisement

[R] Reset system—This option recycles the power on the switch.
[F] Reset to factory defaults—This option clears all configuration settings back to the factory
defaults.
Warning If you apply the [F] option, all manual configuration settings will be lost.
[B] Broadcast storm control—This option launches the Broadcast Storm menu, which includes five
options. (These options are discussed in "Configuring Broadcast Storm Control on Switch Ports" in
the Immediate Solutions section.)
[X] Exit to Main Menu—This option exits to the Main Menu.

[N] Network Management

By pressing N on the Main Menu, you reach the Network Management menu. This menu can be used to
define an IP address for the system, Simple Network Management Protocol (SNMP), Spanning−Tree Protocol
(STP), Cisco Discovery Protocol (CDP), and Cisco Group Management Protocol (CGMP).
The following shows the Network Management menu:
Catalyst 1900 − Network Management
[I] IP Configuration
[S] SNMP Management
[B] Bridge − Spanning Tree
[C] Cisco Discovery Protocol
[G] Cisco Group Management Protocol
[H] HTTP Server Configuration
[R] Cluster Management
[X] Exit to Main Menu
Enter Selection:
Let's look at each option from this menu in more detail.
[I] IP Configuration
Choosing I from the Network Management menu brings up a menu that looks similar to the following:
Catalyst 1900 − IP Configuration
Ethernet Address:
—————————————————————Settings————————————————————
[I] IP address
[S] Subnet mask
[G] Default gateway
[V] Management VLAN
[X] Exit to previous menu
Enter selection:
In order to use Telnet or SNMP to manage the switch, an IP address must be assigned to the switch. The
following are the settings from the IP Configuration menu:
[I] IP address—Configures the IP address on the switch.
[S] Subnet mask—Configures the switch's subnet mask.
[G] Default gateway—Configures the destination address for the route processor to which the switch
will forward unknown or out−of−subnet addresses.
00−F3−1F−10−F1−06
10.17.18.254
255.255.0.0
10.17.18.1
1
286

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents