Cisco Catalyst 4000 Series; Catalyst 5000 Series - Cisco RJ-45-to-AUX Brochure

Catalyst 4000 series

Catalyst 5000 series

Catalyst 6000 series

Cisco Catalyst 4000 Series

The Catalyst 4000 series provides very fast and intelligent Layer 2 switching services using a 24Gbps
switching fabric. It is used in Ethernet networks utilizing 10−, 100−, and 100Mbps switching. Let's take a
look at the features of each of the Catalyst 4000 series switches in Table E.8.
Table E.8: Catalyst 4000 series key features.
Feature 4003
Slots 3
Max ports 96
Max MAC addresses 16,000
Max VLANs 1,024
Backplane 24Gbps
Catalyst 5000 Series
With the introduction of applications such as video, audio, and interactive programs, a new set of challenges
were introduced in the intranet world. They can be summarized as follows:
Scalability—The new intranet client/server model inverses the old 80/20 rule because most intranet
traffic crosses workgroup boundaries to reach servers located all across the campus. This traffic flow
requires network scalability and performance for both Layer 2 and Layer 3 switching.
Performance—Usage of the network through network−enabled applications is causing an increase in
network traffic, requiring faster devices and media in the network.
Critical application integrity—With the convergence of mission−critical business and multimedia
applications on the common intranet, there is an increasing need for QoS and support for
multicast−intensive applications.
The Catalyst 5002 delivers features in a small package for the needs of smaller wiring closets, but still
switches 1 million pps. The 5000 continues to address the needs of switched wiring closets with 1 to 3 million
pps performance. The 5505 has a five−slot chassis like the Catalyst 5000, and is made for the high−end wiring
closet with performance from 1 to 25 million pps. The 5509 supports 10/100 Ethernet, or Gigabit Ethernet for
backbone applications, with over 25 million pps switching performance. The 5500 is the most versatile switch
in the Catalyst series, with the ability to support LightStream 1010 ATM switching or Catalyst 8500 Layer 3
switching line cards as well as all the Catalyst 5000 series line cards. The Catalyst 5500 is positioned as a
high−capacity wiring closet or data center switch, with over 25 million pps of switching performance.
Key Features
Key features of the Catalyst 5000 series of switches are as follows:
High−speed connectivity using standard Fast Ethernet, FDDI, or ATM interfaces
Fast EtherChannel supported on Supervisor Engine II ports and Fast Ethernet line cards, providing up
to 800Mbps of load sharing, redundant point−to−point connections
Support for all Supervisor Engines, including the NetFlow Switching feature card option on
Supervisor Engine II, which scales to multimillion pps forwarding across campus
Dual redundant switching engines, power supplies, and a passive backplane design that ensures full
system redundancy for mission−critical environments
Cisco's Virtual Trunking Protocol (VTP), which supports dynamic VLANs and dynamic trunk
4006 4908G
6 Fixed
240 8
16,000 16,000
1,024 1,024
60Gpbs 22Gbps
365
4912G
Fixed
12
16,000
1,024
24Gbps