Verifying Atm Port Statistics - Cisco Catalyst 2900 XL Series Installation And Configuration Manual

Verifying ATM Port Statistics

The port statistics verify that the ATM module is transmitting and receiving data across the
ATM network. For example, the display shows the number of ATM Adaptation Layer 5
(AAL5) frames and ATM cells transmitted and received. You can verify ATM port statistics
by using the show interface command.
Using the show interface command
The show interface command verifies that the ATM port is connected to the network by
displaying information such as the operational state of the ATM interface and the rate at
which packets are transferred.
To verify ATM port statistics from the CLI, do the following:
Step 1 Enter the enable EXEC command:
ATM> enable
ATM#
Configuring the ATM Module 3-5