Drive Wheels; Drive Wheels With Quick-Release Axle - Otto Bock Start M2S Instructions For Use Manual

Use
32

7.11 Drive wheels

WARNING
Improper assembly of removable wheels
Tipping, falling over of the user due to wheels coming off
► After each assembly, verify the proper fit of the removable wheels. The quick-release axles must be firmly
locked in the wheel attachment.
WARNING
Defective tyres
Accidents/falling due to poor traction, reduced braking force or lack of manoeuvrability
► Maintain sufficient tyre pressure. Note the information in the section "Technical data" or on the tyre sidewall.
► Ensure that the pressure is the same in both tyres.
► Ensure that the tyres have sufficient tread depth.
CAUTION
Reaching into exposed drive parts
Crushing, pinching due to incorrect handling
► Do not reach between the drive wheel and wheel lock or drive wheel and side panel when driving the product.
► Do not reach into the spokes of the rotating drive wheel while riding in the product.
CAUTION
Heat development when braking with handrims
Burns due to insufficient hand protection
► Wear wheelchair gloves when travelling at high speeds.
The wheelchair is moved, steered, braked and stopped with the help of the handrims on the drive wheels.

7.11.1 Drive wheels with quick-release axle

CAUTION
Incorrect removal/attachment of the wheels
Tipping, falling due to incorrect installation
► The user is not permitted to sit in the wheelchair during wheel replacement.
► For changing wheels, set the wheelchair onto a solid surface.
► To change the wheels, secure the wheelchair against tipping over or rolling away.
► If the drive wheel does not lock securely or has too much sideways play, contact the qualified personnel
promptly.
1) Release the wheel lock.
2) Grip the area between the spokes near the hub with your fingers.
3) Use your thumb to press the push-button on the quick-release axle.
24
33
Start M2S, Start M2