Electronic Components - Otto Bock E-MAG Active 17B203 Instructions For Use Manual

1.6.3 Electronic components

3
1.6.4 Accessories
4
17LS3=16(-T) lamination joint bar for anchoring in lam­
ination resin or prepreg technique – steel or titanium
(length 130 mm, width 16 mm, thickness 6 mm bottom
and 3 mm top)
6
Medial support joint with dummy in 5° or 7.5° (not illus­
trated)
INFORMATION
The subsequent conversion of the flexion components to 7.5° may only be completed by an authorised Ottobock
Service Centre.
1.6.5 Construction
The knee joint has a 6 mm posterior placement. This facilitates easy extension of the knee joint, which assures
problem-free unlocking.
17B203=* E-MAG Active
A Electronics / receptacle set (317B3/317Z13)
B Battery / receptacle set (317B20/317Z21)
C Battery charger (317L20)
D Dummy for battery receptacle (30Y103)
E Dummy for electronics receptacle (30Y100)
F Dummy for electronics (30Y123)
G Dummy for battery (30Y124)
H Battery cable and locking unit (317E20)
I Electronics cable (317E2)
5
17B206 medial support – identical for left and right –
steel lamination joint bars for medial support =
17LS3=16(-T)
Introduction
5