Table of Contents
Advertisement
Low flow hydraulic circuit control pedal (if
equipped)
WARNING
Unexpected machine movement!
ALWAYS lock the auxiliary pedals when not in
use.
Failure to comply could result in death or se-
rious injury.
This pedal is used to direct the clamshell.
(1) The clamshell turns to the right.
(2) The clamshell turns to the left.
See chapter "Adjustment and locking auxiliary pedals".
ATTENTION: Consult your CASE CONSTRUCTION
Dealer before mounting optional tools.
Low flow hydraulic circuit proportional
switch (if equipped)
This switch is used for optional accessories such as
clamshell, if equipped, etc.
NOTICE: Consult your CASE CONSTRUCTION Dealer
to select the optional accessory compatible with your ma-
chine and to correctly adjust the flow required for its use.
3 - CONTROLS/INSTRUMENTS
W0222A
3-12
11
LY2WL1-001
12
3208F2E6
Advertisement
Table of Contents
