Case CX300C Operator's Manual page 208

3. Loosen the air bleeder plug (1) of the cooler to remove
the air inside the cooler.
4. Tighten the air bleeder (1) when the coolant overflows
from the air bleeder plug (1).
Air bleeder plug (1) tightening torque 24.5 - 30.5 N·m
(18.1 - 22.5 lb ft).
5. Run the engine at idle speed for about five minutes.
Add coolant solution if the level in the expansion reser-
voir drops.
ATTENTION: Do not fill the expansion reservoir above
the " Full" mark.
6 - MAINTENANCE
6-26
7
DC2MPI-004