Table of Contents
Advertisement
7. (Machine with attachment)
Bring the machine right to the front of the trailer and
lower the attachment to the trailer bed.
7.
(Machine without attachment)
Move the machine right to the front of the trailer,
swing the upperstructure.
8.
Stop the engine, remove the ignition key, place the
function cancellation lever in the central position (with
the safety bar inward).
9.
Make sure that all doors, hoods and access panels
are correctly locked.
10. Fold the rear view mirrors inwards.
11. Use blocks and chains to fasten the machine and the
attachment (if equipped) to the trailer. See Tie downs
for shipment - Procedure on page 5-6.
12. Measure the distance between the ground and the
highest point of the machine. You must know the
overall height.
5 - TRANSPORT OPERATIONS
5-4
7
UUDO6A-007A
8
UUDO6A-008A
9
2-0238T
10
PDH0251ATBP1
Advertisement
Table of Contents
