Table of Contents
Advertisement
3. Pull the clip outward, remove the bulb and install a bulb
of the same wattage ( 70 W).
ATTENTION: Never put your fingers on a tungsten iodide
bulb.
4. Install the clip and reconnect the plug.
5. Put the working light back into position and install the
mounting screws.
Upperstructure and cab headlight
1. Open the front box.
2. Remove the switch bracket to access the headlamp.
3. Disconnect the plug.
6 - MAINTENANCE
6-82
4
WNNEYW-003A
5
PV5ETN-001A
6
PV5ETN-002
7
PV5ETN-003A
Advertisement
Table of Contents
