Table of Contents
Advertisement
Handling the load with the quick coupler (optional)
The load with the quick coupler must be handled with the
bucket cylinder rod completely extended.
ATTENTION: Maintain this position throughout the load
handling operation.
The handling eye must be able to be seen from the cab
throughout the load handling operation.
ATTENTION: It is strictly forbidden to use the front or rear
fixing points (1) of the quick coupler to handle the load.
NOTE: The quick coupler eye can be used for handling
loads up to 10 t.
4 - OPERATING INSTRUCTIONS
4-20
2
W1UFZ2-001A
3
W1UFZ2-002B
Advertisement
Table of Contents
