Table of Contents
Advertisement
Alternator
WARNING
Improper operation or service of this machine
can result in an accident.
Welding sparks can cause battery gases to ex-
plode. When welding on the machine, always
disconnect the B+ and D+ wires from the alter-
nator. Check the wire markings before recon-
necting to ensure a correct connection.
Failure to comply could result in death or se-
rious injury.
Service specifications
Check: Every 1000 hours
ATTENTION: Do not use steam cleaning equipment or a
cleaning solvent to clean the alternator.
Ask your CASE CONSTRUCTION Dealer to check the
alternator.
NOTE: Make sure that the terminal protectors are cor-
rectly installed.
Starter motor
Service specifications
Check: Every 1000 hours
Ask your CASE CONSTRUCTION Dealer to check the
starter motor.
NOTE: Make sure that the terminal protectors are cor-
rectly installed.
6 - MAINTENANCE
W0253A
6-80
1
MCHP8N-002A
1
MCHP8N-012
Advertisement
Table of Contents
