Installing An Ip21 Component - Huawei UPS5000-E User Manual

UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Figure 3-19 Securing the antiseismic kits to the floor
----End

3.2.3.2 Installing an IP21 Component

Procedure
Step 1 Install leveling feet at the bottom of the IP21 component, with two long feet on the front and
two short feet at the rear.
Figure 3-20 Installing leveling feet
Step 2 Secure the IP21 component to the top of each cabinet using four M12 screws.
Issue 02 (2017-02-25)
 Refer to the "front" and "back" silk screens on the surface of the IP21 component.
 Select the mounting holes for leveling feet based on the cabinet width onsite.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Installation
64