Huawei UPS5000-E User Manual page 177

UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Item
string
CIM
logical
start addr

Item
Current
source
BCB
connects
to CIM
Batt.
abnormal
BCB trip
Multi-Hal
l cur.
setting

Issue 02 (2017-02-25)
Description
Communication address when the northbound device queries CIM data.
Figure 4-58 shows the Advanced Param. screen.
Figure 4-58 Advanced Parameters
Description
Specifications of the Hall effect sensor.
Determine whether the BCB connects to the CIM.
Determine whether BCB trips when batteries are not functioning properly.
The value of Multi-Hall cur. setting equals the number of positive or
negative Hall effect sensors in a single battery string and should be greater
than or equal to 1.
Figure 4-59 shows the battery string config screen. On this screen, the CIM No. and BIM
No. can be set under each battery string.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 User Interface
168