Capacity Test - Huawei UPS5000-E User Manual

UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Step 3 On the Maintenance screen, tap Battery Maint., as shown in
Step 4 Tap Start on the right of Shallow Dis. Test to start a shallow discharge test, as shown in
Figure
Figure 5-26 Starting a shallow discharge test
----End

5.6.3 Capacity Test

Context
Before a capacity test, ensure that:
Issue 02 (2017-02-25)
 If an incorrect password is entered three consecutive times, the account will be logged out for 5
minutes.
5-26.
When the battery test is complete, the test data is used as common test data. Record the data obtained
from the latest five tests.
Tap Stop next to Shallow Dis. Test in any of the following cases:
 The battery discharge capacity reaches the specified value (10%–50%, 20% by default).

The discharge voltage reaches the warning threshold (calculated in real time).

The load ratio fluctuation exceeds 10%.

An alarm is generated.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Operations
Figure 5-24.
224