Huawei UPS5000-E User Manual page 203

UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)


Issue 02 (2017-02-25)
RCCMD Execute: Specify the RCCMD client IP address, port, and command to be
executed. For example, enter SHUTDOWN, and the RCCMD client will shut down the
computer after receiving the command.
Figure 4-96 RCCMD execute
RCCMD TRAP: When the event happens, the MDU will send the TRAP message to all
connected RCCMD clients based on the sending mechanism.
If you want to define the TRAP message by yourself, you can use the TRAP signal to
display the UPS information. For example, if you enter #INVOLT V, the RCCMD client
will receive the UPS input voltage value (for example, single-phase: 220 V; three-phase
A: 220 V, B: 220 V, C: 220 V).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 4-9 lists the signal names that can be entered.
4 User Interface
194