Disassembling The Piston Rod - Husqvarna FC 250 2016 Repair Manual

9.15 Disassembling the iston rod
9 SHOCK ABSORBER, SWINGARM
-
(D.
Remove lock ring
Info
Check inner surface; do not scratch. Remove any
burrs with sandpaper if needed.
-
Remove the piston rod.
-
Remove adjusting ring @ with the intermediate washer.
-
Drain the oil.
-
Remove compression adjuster @. Remove the spring and
piston.
Preparatory work
-
Remove the spring. (!ill p. 61)
-
Disassemble the damper. (!ill p. 62)
63