Work On The Clutch Cover - Husqvarna FC 250 2016 Repair Manual

17 ENGINE
17 .4.3
184

Work on the clutch cover

Guideline
Oil nozzle for M4
clutch lubrica-
tion
-
Mount and tighten oil nozzle
Guideline
Oil nozzle, pis­ M5
ton cooling
-
Position all bearing locks.
-
Mount and tighten screws (D.
Guideline
Locking screw
M5
for bearing
-
Check the oil pressure regulator valve.
-
Blow out the oil channel with compressed air and check that
it is clear.
O.
-
Remove shaft seal ring
8.
-
Remove lock ring
8.
-
Remove shaft seal ring
2 Nm (1.5 lbf ft)
®
Loctite 243
0.
2 Nm (1.5 lbf ft)
Loctite ® 243
6 Nm (4.4 lbf ft)
®
Loctite 243
(0 p. 186)
™
™
™
..