Husqvarna FC 250 2016 Repair Manual page 191

-
Press the crank pin out of the lower crankweb.
-
Press in new crank pin
t)
✓ Oil hole
X If the oil holes are not correctly aligned, the conrod bear­
ing will not be supplied with oil.
-
Blow compressed air through the oil channel to check that it
is clear.
310359-10
-
Mount new connecting rode.
Info
Thoroughly oil bearing Ci).
310360-10
-
Position special tool (3 on the press.
Crankshaft pressing tool (75029047000)
Crankshaft pressing tool insert (79029008000)
-
Insert the crankweb with the connecting rod and bearing.
Position the second crankweb.
-
Position special tool @ with the heel pointing down.
I
Crankshaft pressing tool insert (79029008000)
310424-10
fD
all the way.
is aligned with oil hole G).
(�
17 ENGINE
p. 290)
(0 p. 293)
(� p. 293)
189