Installing The Swingarm - Husqvarna FC 250 2016 Repair Manual

9 SHOCK ABSORBER, SWINGARM
C,.
-
Remove fitting
-
Lower the swingarm.
-
Remove the cable ties.
0.
-
Remove screws
(D
-
Remove screws with the washers.
-
Remove the frame protectors on the left and right.
-
Remove nut @.
-
Remove the swingarm pivot.
-
Remove the swingarm.
Main work
-
Position the swingarm. Mount the swingarm pivot.
0-
-
Mount and tighten nut
Guideline
I I
Nut, swingarm pivot
-
Position the frame protectors on the left and right.
-
Mount and tighten screws
Guideline
Screw, frame pro­
tector
-
Mount and tighten screws
Guideline
Screw, frame pro­
tector
-
Mount the cable ties.
M16x1 .5 I 100 Nm (73.8 lbf ft) I
8.
M5 3 Nm (2.2 lbf ft)
8
with the washers.
M5 3 Nm (2.2 lbf ft)
81