Table of Contents
Advertisement
Keysight 16196A/B/C/D Parallel Electrode SMD Test Fixture
Operation and Service Manual
1
Installation Guide
In this chapter, the procedures required from the time the 16196A/B/C/D
Parallel Electrode SMD Test Fixture arrives until its use begins are described.
Incoming Inspection
Inspect the shipping container for damage. If the shipping container or
cushioning material is damaged, it should be kept until the contents of the
shipment have been checked for completeness and the 16196A/B/C/D has
been checked mechanically and electrically.
The shipment should contain everything listed in
contents are incomplete or if there is mechanical damage or defect, notify the
nearest Keysight Technologies office. If the shipping container is damaged or
the cushioning material shows signs of unusual stress, notify the carrier as well
as the Keysight Technologies office. Keep the shipping materials for the
carrier's inspection.
When the equipment is used for the first time following purchase, "Wear
Check" should be conducted. This "Wear Check" is required for keeping
the measurement accuracy. Refer to
page 39
in
"Wear Check"
for details.
5
Table 1-1
to
"Reference Value Acquisition" on
Table
1-4. If the
Advertisement
Table of Contents
