Table of Contents
Advertisement
Operation
Connecting and Measuring DUTs
Connecting and Measuring DUTs
Connect DUTs to the electrodes and take measurements.
Do not connect a DUT, which has an incompatible size.
Step 1. Remove the cap.
Make sure there is no dirt or other foreign matter in the DUT insertion hole.
Step 2. Insert the DUT into the insulator hole with tweezers.
Use a magnifying glass to check that the DUT is inserted deeply enough into
the insulator hole for it to contact the bottom electrode.
Figure 3-6
Connecting a DUT
Step 3. Fit the cap in place with the mark toward the front, and turn it to the right
until it is locked.
Step 4. Take measurements in accordance with the Operation Manual for the
measuring instrument you are using.
Keysight 16196A/B/C/D Parallel Electrode SMD Test Fixture
29
Advertisement
Table of Contents
