User Maintenance
Cleaning
Cleaning
If the electrodes and insulator assembly become dirty, measuring accuracy
and repeatability will decrease. Also, if dirt adheres to the surfaces of the body,
it will become impossible to remove the cap smoothly. In order to ensure
measurement with high accuracy, be sure to perform cleaning periodically.
Places Requiring Cleaned
Place, which need to be cleaned, are as follows.
•
•
•
•
•
•
•
Figure 4-2
Places to be Cleaned
34
Upper Electrode
(Figure 4-2
Cap Inside
(Figure 4-2
Lower Electrode
(Figure 4-2
Insulator Assembly recessed part
Body side surfaces
(Figure 4-2
Short Plate
Open Plate
Keysight 16196A/B/C/D Parallel Electrode SMD Test Fixture
(1))
(2))
(3))
(Figure 4-2
(5))
(4))