Power Supply Connectors; Removing The Air Separator - Cisco AS5350 Installation Manual

Removing the Old Power Supply
Figure B-7
Power
supply
Note
Figure B-8
Power
supply
Step 5 Disconnect both power supply connectors. Disconnect the backplane connector first, followed by the
system board connector. (See Figure B-9.)
Cisco AS5350 Universal Gateway Chassis Installation Guide
-8

Removing the Air Separator

3
Front panel
There are two power connectors on the power supply. One connects to the backplane and the
other to the system board. (See Figure B-8.)

Power Supply Connectors

Chassis bottom
Backplane
connector
System board
connector
Appendix
78-10754-03 0A