Installing The Cisco As5350; Supply - Cisco AS5350 Installation Manual

Installing the Cisco AS5350

This chapter guides you through the installation of the Cisco AS5350 universal gateway and includes the
following sections:
Setting Up the Chassis, page 3-2
•
• Connecting to the Network, page 3-6
Connecting to the Console and Auxiliary Ports, page 3-11
•
Connecting a Signal Generator to the BITS Port, page 3-13
•
• Connecting an Alarm to the Alarm Port, page 3-14
• Supplying Power, page 3-15
• Where to Go Next, page 3-19
Warning Only trained and qualified personnel should be allowed to install or replace this equipment. To see
translations of the warnings that appear in the publication, refer to the Regulatory Compliance and
Safety Information document that accompanied this device.
Warning This equipment is intended to be grounded. Ensure that the host is connected to earth ground during
normal use. To see translations of the warnings that appear in the publication, refer to the Regulatory
Compliance and Safety Information document that accompanied this device.
Incorrect connection of this or connected equipment to the general purpose outlet could result in a
Warning
hazardous situation. To see translations of the warnings that appear in the publication, refer to the
Regulatory Compliance and Safety Information document that accompanied this device.
78-10754-03 0A
C H A P T E R
Cisco AS5350 Universal Gateway Chassis Installation Guide
3
3-1