Connecting A Modem To The Auxiliary Port; Connecting The Console Terminal - Cisco AS5350 Installation Manual

Connecting to the Console and Auxiliary Ports
Figure 3-13 Connecting the Console Terminal
RJ-45-to-RJ-45
rollover cable

Connecting a Modem to the Auxiliary Port

To connect a modem to the auxiliary port, follow this procedure:
Step 1 Connect a modem to the auxiliary port on the Cisco AS5350 using an RJ-45 rollover cable with an
RJ-45-to-DB-25 adapter. The adapter provided is labeled MODEM. The adapter and the rollover cable
are included in the accessory kit that comes with the universal gateway.(See Figure 3-14.)
Note
Cisco AS5350 Universal Gateway Chassis Installation Guide
3-12
Console port
(RJ-45)
Make sure that your modem and the auxiliary port on the Cisco AS5350 are configured for the
same transmission speed (38400 baud is typical) and hardware flow control with Data Carrier
Detect (DCD) and Data Terminal Ready (DTR) operations.
RJ-45
Chapter 3 Installing the Cisco AS5350
PC (laptop)
78-10754-03 0A