Cisco AS5350 Installation Manual page 42

Supplying Power
The plug-socket combination must be accessible at all times because it serves as the main
Warning
disconnecting device.To see translations of the warnings that appear in the publication, refer to the
Regulatory Compliance and Safety Information document that accompanied this device.
Figure 3-17 Connecting the AC Power Cord
Figure 3-18 Connecting the AC Power Cord to the Redundant Power Supply
Warning Before performing any of the following procedures, ensure that power is removed from the DC circuit.
To ensure that all power is OFF, locate the circuit breaker on the panel board that services the DC
circuit, switch the circuit breaker to the OFF position, and tape the switch handle of the circuit
breaker in the OFF position. To see translations of the warnings that appear in this publication, refer
to the Regulatory Compliance and Safety Information document that accompanied this device.
Cisco AS5350 Universal Gateway Chassis Installation Guide
3-16
Chapter 3 Installing the Cisco AS5350
Power switch
Power cables
78-10754-03 0A