Connecting To The Network; Cisco As5350 Ground Lug Attachment; Cisco As5400 Ground Lug Attachment - Cisco AS5350 Installation Manual

Connecting to the Network

Figure 3-5
Figure 3-6

Connecting to the Network

This section describes how to connect the Cisco AS5350 to your network. The cables required to connect
the universal gateway to a network are not provided. For ordering information, contact customer service.
See the "Obtaining Technical Assistance" section on page xiv, or see Appendix C, "Cabling
Specifications," for cable and port pinouts.
To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network
Warning
voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some
LAN and WAN ports use both RJ-45 connectors. Use caution when connecting cables. To see
translations of the warnings that appear in the publication, refer to the Regulatory Compliance and
Safety Information document that accompanied this device.
Do not work on the system or connect or disconnect cables during periods of lightning activity. To see
Warning
translations of the warnings that appear in the publication, refer to the Regulatory Compliance and
Safety Information document that accompanied this device.
Cisco AS5350 Universal Gateway Chassis Installation Guide
3-6

Cisco AS5350 Ground Lug Attachment

Ground lug
attachment

Cisco AS5400 Ground Lug Attachment

Chapter 3 Installing the Cisco AS5350
Ground lug
attachment
78-10754-03 0A