Replacing The Chassis Cover - Cisco AS5350 Installation Manual

Replacing the Chassis Cover

Replacing the Chassis Cover

To replace the chassis cover, follow this procedure:
Step 1 Place the chassis bottom so that the front panel is facing you.
Step 2 Hold the chassis cover over the chassis bottom, and align each of the cover tabs with the chassis tabs at
the top rear of the chassis, as shown in Figure B-14.
Figure B-14 Replacing the Chassis Cover
Lower the front of the top cover to close the chassis, and ensure the following:
Step 3
•
•
•
When the chassis cover is properly assembled, no tabs are visible.
Secure the chassis cover with five screws.
Step 4
Cisco AS5350 Universal Gateway Chassis Installation Guide
-12
Chassis cover
3
Front panel
The chassis cover tabs fit under the edge of the chassis rear panel so that they are not exposed.
The chassis tabs fit under the chassis cover so that they are not exposed.
The chassis cover side tabs on both sides fit inside the chassis side panels so that they are not
exposed.
Chassis bottom
Appendix
78-10754-03 0A