Cisco AS5350 Installation Manual page 34

Connecting to the Network
Hazardous network voltages are present in WAN ports regardless of whether power to the router is
Warning
OFF or ON. To avoid electric shock, use caution when working near WAN ports. When detaching
cables, detach the end away from the router first. To see translations of the warnings that appear in
the publication, refer to the Regulatory Compliance and Safety Information document that
accompanied this device.
Warning The telecommunications lines must be disconnected 1) before unplugging the main power connector
and/or 2) while the housing is open. To see translations of the warnings that appear in the publication,
refer to the Regulatory Compliance and Safety Information document that accompanied this device.
You can connect the Cisco AS5350 to a WAN in the following ways:
• Connect each T1/PRI port to an RJ-45 jack with a straight-through RJ-45 to RJ-45 cable. (See
Figure 3-8 and Figure 3-9.)
Figure 3-8
Cisco AS5350 Universal Gateway Chassis Installation Guide
3-8
Connecting a 2-Port or 4-Port DFC to an RJ-45 (T1) Jack
Straight-through
RJ-45-to-RJ-45 cable
Chapter 3 Installing the Cisco AS5350
RJ-45 jack
78-10754-03 0A