Required Tools And Equipment - Cisco AS5350 Installation Manual

Required Tools and Equipment

Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord.
Warning
To see translations of the warnings that appear in this publication, refer to the Regulatory Compliance
and Safety Information document that accompanied this device.
Before working on equipment that is connected to power lines, remove jewelry (including rings,
Warning
necklaces, and watches). Metal objects will heat up when connected to power and ground and can
cause serious burns or weld the metal object to the terminals. To see translations of the warnings that
appear in this publication, refer to the Regulatory Compliance and Safety Information document that
accompanied this device.
Only trained and qualified service personnel should be allowed to install or replace this equipment.
Warning
To see translations of the warnings that appear in this publication, refer to the Regulatory Compliance
and Safety Information document that accompanied this device.
Warning This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that
a UL Listed and Certified fuse or circuit breaker no larger than 60 VDC, 15 A is used on all
current-carrying conductors. To see translations of the warnings that appear in this publication, refer
to the Regulatory Compliance and Safety Information document that accompanied this device.
Before opening the chassis, ensure that you have discharged all static electricity from your body and be
Caution
sure that the power is off.

Required Tools and Equipment

You need the following tools and equipment:
•
•
•
•
•
Cisco AS5350 Universal Gateway Chassis Installation Guide
-2
Medium-size Phillips screwdriver
Small or medium flat-blade screwdriver
ESD-preventive wrist strap
Tie-wraps (optional)
Antistatic bag (optional)
Appendix
78-10754-03 0A