Manitowoc Welbilt Indigo NXT QuietQube Manual page 19

QuietQube / CVD Installation
Electrical
Ice Machine Voltage
Install strain relief and proper
Disconnect within 6 feet
Ice Beverage 115/1/60
wiring to ice machine
from Condensing Unit.
Model Head 230/1/50
Section
All Non – IB Model 115/1/60
Head Sections 230/1/50
CVDF0600 208-230/1/60
208-230/3/60
Mount Disconnect Here
208-230/1/50
CVDF0900 208-230/1/60
208-230/3/60
208-230/1/50
Removable Panel
CVDT1200 208-230/1/60
208-230/3/60
CVDF1400 208-230/1/60
208-230/3/60
CVDF1800 208-230/1/60
208-230/3/60
Wiring for the CVD condensing units should be a solid copper
208-230/1/50
CVDF2100 208-230/1/60
conductor.
208-230/3/60
Maximum
Important:
Fuse/Circuit
Due to continuous improvements, this information is
Breaker
for reference only. Please refer to the ice machine
serial number tag to verify electrical data.
15 amp
• Ice machine must be grounded
• Separate fuse/circuit breaker must be provided for
15 amp
each ice machine
15 amp
• Qualified electrician must determine proper wire
size
20 amp
15 amp
20 amp
• Maximum allowable voltage variation is ±10% of
25 amp
the rated voltage at ice machine start-up
15 amp
20 amp
• Check all green ground screws in the control box
15 amp
40 amp and verify they are tight before starting the ice
25 amp
machine.
40 amp
50 amp
30 amp
19
© Welbilt, Inc.