Manitowoc Welbilt Indigo NXT QuietQube Manual page 158

Indigo NXT Ice Machine Troubleshooting Tips
Water Level Probe Diagnostics
Step 5 – Unplug the probe from the
board and pull the water level probe
out of its mount. Ohm out from the
connector to the three probes.
• Red wire to short probe = 0 ohms.
• Black wire to both long probes = 0
ohms to only one of the long probes
and infinity to the other long probe.
• White wire to the probe that
showed infinity to the black wire
should now show 0 ohms.
NOTE: With Continuity DO NOT Change Probe!
Without Continuity, the Probe is Defective
Black
White
Red
Short
Probe
158
© Welbilt, Inc.